Adjustable Pedestal Base Units for Decking Joists

The Caro Pedestal Adjustable Bases for Decking Joists are available in five heights which, when the relevant Support Plate is chosen, will offer a wide range of height variation possibilities.  The large and easy to access threaded “wheel” adjuster gives infinite height tuning, so as to achieve the perfect flat surface.
 
Successfully specified and used throughout Europe since 1978, the paving pedestal system offers a comprehensive solution for your paving and decking terrace areas. Allowing for infinite adjustment in height and level using the various modular components shown below.
 
If you have any questions regarding our paving pedestal range, or our decking and stackable Caro Support ranges, don’t hesitate to get in touch!​


Adjustable Pedestal Bases

PV3.5/5 - Adjustable pedestal base to suit heights: 35-50mm

PV3.5/5

Adjustable pedestal base to suit heights from 35mm-50mm. 
PV5/8 - Adjustable pedestal base to suit heights: 50-80mm

PV5/8

Adjustable pedestal base to suit heights from 50mm-80mm. 
PV8/11 - Adjustable pedestal base to suit heights: 80-110mm

PV8/11

Adjustable pedestal base to suit heights from 80mm-110mm. 
 
PV11/14 - Adjustable pedestal base to suit heights: 110-140mm

PV11/14

Adjustable pedestal base to suit heights from 110mm-140mm. 
PV14/17 - Adjustable base to suit heights: 140-170mm

PV14/17

Adjustable pedestal base to suit heights from 140mm-170mm. 


Support Plates

Adjustable paving support plate CP

CP

For use with all Adjustable bases except PV3/5, CP will support decking joists, up to 75mm width, with it’s Patented “Twist and Fix” feature.
Adjustable paving support plate CPV

CPV

Also for use with Decking Joists. Simply fix through the upright to ensure secure installation.
Adjustable paving support plate CP0

CP0

For use where the supported material doesn’t require securing or fixing ie. edges, fully butted together boards/ slabs, grills or grids, etc.


Extension Pieces

F30 - Pedestal extension piece: 30mm high

F30

The F30 Extension Piece will increase the height variance of any of the above adjustable bases by an extra 30mm. This product can also be stacked in multiples for further height adjustment.
AF100 - Pedestal Extension Piece: 100mm high

AF100

The AF100 Extension Piece will increase the height variance of any of the above adjustable bases by an extra 100mm. This product can be screwed together in multiples for further height adjustment.
 

 

 


Accessories

Adjustable paving slope corrector HS2

HS2

The HS2 Slope Corrector, when placed under the Base Plate, will compensate for a 2 degree slope. They can be added in multiples to correct in 2-degree increments up to a 10-degree slope.
Adjustable paving Packer Shim PS2

PS2

The Rubber Packer Shim is 2mm thick and, apart from offering acoustic and slippage benefits, they can be used for compensation of irregularities on the underside of materials being supported. Simple to cut, if required, the Shims give that final tweak to the system.



Caro AK Pedestal Range - for Edge Installations

Whilst the standard adjustable bases can be trimmed to allow for edge installations, the Caro Pedestal AK range is available with a pre-formed flat side helping to reduce time and labour.  These are available in the same height variations as above, so when ordering from our range of decking pedestal base units & support pads, simply replace the PV on the above codes with AK.
 

Technical Support

For technical assistance or pricing & availability on Caro's range of timber decking support pedestals & pads, please call our Sales Department on (01763) 244446 or you can enquire using our online form.

Useful Links

Caro Pedestal Literature
FASTRACK CAD drawings for the Caro Pedestal